Shop all hydraulic hoses. If you cannot find what you need, please call us for additional products.
.
The H180 Series hose exceeds SAE 100R1 Type S and is one of Danfoss’s premium hoses. Used to transfer low to medium pressure hydraulic and water-based fluids. Built with a nitrile construction and 1 wire braid reinforcement. Operating temperatures are from -50°F to +260°F. Operating Pressures are from 3,700psi to 2,400psi depending upon size.
Fitting Requirements
Crimp: Z Series
Field Attachable: 1R Series
The H280 Series hose exceeds SAE 100R16 Type S and is one of Danfoss’s premium hoses. Used to transfer low to medium pressure hydraulic and water-based fluids. Built with a nitrile construction and 2 wire braid reinforcement. Operating temperatures are from -50°F to +260°F. Operating Pressures are from 6,500psi to 1,600psi depending upon size.
Fitting Requirements
Crimp: Z Series
Field Attachable: 2R Series
The EC215 Series hose meets SAE 100R16 and is one of Danfoss’s Winner line hoses. Used to transfer low to medium pressure hydraulic and water-based fluids. Built with a synthetic rubber construction and 2 wire braid reinforcement. Operating temperatures are from -40°F to +212°F. Operating Pressures are from 5,800psi to 1,300psi depending upon size.
Fitting Requirements
Crimp: Z Series, Two-Piece Winner
Field Attachable: 2R Series
The H145 Series hose exceeds SAE 100R17 and is one of Danfoss’s premium constant pressure hoses. Used to transfer high pressure hydraulic and water-based fluids when a small bend radius is needed. Built with a neoprene construction. Operating temperatures are from -40°F to +212°F. Operating Pressure of 3,045psi for every size.
Fitting Requirements
Crimp: Z Series
Field Attachable: N/A
The 3TR7 Series hose exceeds SAE 100R7 and is one of Danfoss’s Synflex Optimum Thermoplastic hoses. Used to transfer low to medium pressure hydraulic and water-based fluids. Built with a nylon construction and textile braid reinforcement. Operating temperatures are from -40°F to +100°F. Operating Pressures are from 3,050psi to 1,000psi depending upon size. Commonly found on forklifts.
Fitting Requirements
Crimp: Z Series (with sleeve FF91064)
Field Attachable: 901/902 Series
The 3TR7N Series non-conductive hose exceeds SAE 100R7 and is one of Danfoss’s Synflex Optimum Thermoplastic hoses. Used to transfer low to medium pressure hydraulic and water-based fluids. Built with a nylon construction and textile braid reinforcement. Operating temperatures are from -40°F to +100°F. Operating Pressures are from 3,050psi to 1,000psi depending upon size. Commonly found on forklifts.
Fitting Requirements
Crimp: Z Series (with sleeve FF91064)
Field Attachable: 901/902 Series
The 3TR8 Series hose exceeds SAE 100R8 and is one of Danfoss’s Synflex Optimum Thermoplastic hoses. Used to transfer low to medium pressure hydraulic and water-based fluids. Built with a nylon construction and 2 textile braid reinforcement. Operating temperatures are from -40°F to +100°F. Operating Pressures are from 5,100psi to 2,050psi depending upon size. Commonly found on boom trucks.
Fitting Requirements
Crimp: Z Series (with sleeve FF91064)
Field Attachable: 901/902 Series
The 3TR8N Series non-conductive hose exceeds SAE 100R8 and is one of Danfoss’s Synflex Optimum Thermoplastic hoses. Used to transfer low to medium pressure hydraulic and water-based fluids. Built with a nylon construction and 2 textile braid reinforcement. Operating temperatures are from -40°F to +100°F. Operating Pressures are from 5,100psi to 2,050psi depending upon size. Commonly found on boom trucks.
Fitting Requirements
Crimp: Z Series (with sleeve FF91064)
Field Attachable: 901/902 Series
Truck Hoses
For more information regarding pressure ratings, torque specifications, approved applications, and other various charts please see our technical information page here
Shop all Truck hoses. If you cannot find what you need, please call us for additional products.
.
The EC038 Series hose meets SAE J1402, DOT/FMVSS 106 Type All and is Danfoss’s premium air brake hose. Built with a highly engineered EPDM construction and textile braid reinforcement. Operating temperatures are from -40°F to +212°F. Operating Pressure of 225psi for all sizes.
Fitting Requirements
Crimp: 338P Series
Field Attachable: 338B Series
The H069 Series hose meets SAE 100R5, SAE J1402 Type II, DOT All, ABS, and is one of Danfoss’s premium hoses. Suitable for air, fuel, grease, hydraulic and water-based fluids. Built with a nitrile construction and texture and wire braid reinforcement. Operating temperatures are from -40°F to +200°F. Operating Pressures are from 3,000psi to 1,500psi depending upon size.
Fitting Requirements
Crimp: 069E Series
Field Attachable: 069D Series
The H569 Series hose meets SAE 100R5, SAE J1942/1, SAE J1402 Type II, ABS, and is one of Danfoss’s premium hoses. Suitable for air, fuel, grease, hydraulic and water-based fluids. Built with a CPE construction and texture and wire braid reinforcement. Operating temperatures are from -40°F to +200°F. Operating Pressures are from 3,000psi to 1,500psi depending upon size.
Fitting Requirements
Crimp: 069E Series
Field Attachable: 247N Series
The EH225 Series hose meets SAE J20 R3 Class A and is Danfoss’s premium silicone heater hose. Built with a silicone construction and single ply polyester braid reinforcement. Operating temperatures are from -65°F to +350°F. Operating Pressure of 400psi to 175psi depending upon size.
Fitting Requirements
Crimp: N/A
Field Attachable: Barb
The EH226 Series hose meets SAE J20 R1 Class A and is Danfoss’s premium silicone coolant hose. Built with a silicone construction and 4 ply woven polyester braid reinforcement. Operating temperatures are from -65°F to +350°F. Operating Pressure of 1080psi to 233psi depending upon size.
Fitting Requirements
Crimp: N/A
Field Attachable: Barb
The H324 Series hose is Danfoss’s premium power steering hose. Built with a nitrile construction and 2 ply textile braid reinforcement and a neoprene cover. Operating temperatures are from -40°F to +250°F. Operating Pressure of 1125psi. This hose is only offered in size 06 (3/8”).
Fitting Requirements
Crimp: N/A
Field Attachable: Barb
The 4247 Eclipse and 3270 Solstice Series hose meets SAE J844, SAE J1131, SAE J2494-3, DOT-FMVSS 106, and is one of Danfoss’s premium Synflex tubing. Suitable for air transfer. Built with a UV stabilized thermoformable construction sizes.
Fitting Requirements
Crimp: N/A
Field Attachable: Brass Adapters
The EN-TW Series hose exceeds SAE 100R14-A & B, SAE J517 and is one of Danfoss’s winner line hoses. Used to transfer fuel, oils, air, coolant, paint, and other chemicals. Built with a smooth bore PTFE construction and an outer 304 stainless steel wire braid reinforcement. This hose is non-conductive. Built to withstand continuous high heat, flexing, vibration, and impulsing while maintaining a low coefficient of friction. Operating temperatures are from -50°F to +260°F. Operating Pressures are from 3,000psi to 1,000psi depending upon size.
Fitting Requirements
Crimp: E Series
Field Attachable: PTFE Reusable
General Purpose Hoses
For more information regarding pressure ratings, torque specifications, approved applications, and other various charts please see our technical information page here
Shop all general purpose hoses. If you cannot find what you need, please call us for additional products.
.
The H201 Series hose is one of Danfoss’s premium easy couple hoses. Used to transfer air, fuel, hydraulic fluid, and water-based fluids. Built with a nitrile construction and a textile braid reinforcement. Operating temperatures are from -40°F to +212°F. Operating Pressures are from 300psi to 200psi depending upon size.
Fitting Requirements
Crimp: N/A
Field Attachable: 100B Series, Barb
The H332 Series hose is one of Danfoss’s premium general purpose hoses. Used to transfer air, fuel, hydraulic fluid, and water-based fluids. Built with a CPE construction and a textile braid reinforcement. Operating temperatures are from -40°F to +212°F. Operating Pressures are from 300psi to 200psi depending upon size.
Fitting Requirements
Crimp: N/A
Field Attachable: 100B Series, Barb
The WH004 Series hose meets SAE 100R4 and is one of Danfoss’s winner line hoses. Used in suction and return systems of hydraulic, fuel, air, chemical, and water-based fluids. Built with a synthetic rubber construction and texture with helical and anti-static wire reinforcement. Operating temperatures are from -40°F to +212°F. Operating Pressures are from 305psi to 60psi depending upon size.
Fitting Requirements
Crimp: Z Series
Field Attachable: Barb
Shop Hoses
For more information regarding pressure ratings, torque specifications, approved applications, and other various charts please see our technical information page here
​The PFE Series hose is Coilhose’s Flexeel hose. Built with a polyurethane construction and textile braid reinforcement. Extremely lightweight and durable. Suitable for air transfer. Operating temperatures are from -40°F to +165°F. Operating Pressure of 200psi.
Fitting Requirements
Crimp: N/A
Field Attachable: PRM, PRS
The H345 Series hose is Danfoss’s premium pressure washer hose. Built with a nitrile construction and one wire braid reinforcement with a blue nitrile cover. Suitable for cold and hot water and resistant to usual detergents. Operating temperatures are from -0°F to +200°F. Operating Pressure of 3000psi.
Fitting Requirements
Crimp: Z Series
Field Attachable: N/A